PRODUCT NANE: ASANSÖR KONTROL KARTI HD BE
BRAND: HEDEFSAN
GENERAL INFORMATION:
Compatible EN81-20
Simple Activation & Installation
Programmable inputs and outputs
GENERAL SPECIFICATION:
Compatible
EN81-20
• Assİgned and programmable outputs
• Door opening leveling
• Adjustment of parking floor inside the car
• 3 m/s speed support
• Exit to next floor
• Ability to work up to 4 groups of lifts
• Call redirection in group operation
• 16 standard stops, up to 32 floors
• Call buttons and call lamps need only one shared wire.
• Programming with password protection, PUK code protection
against unauthorized using.
• Ail parameters can be simply adjusted via b uiilf in
LCD screen and program buttons.
• Last 20 errors including information of floor can be traced
on LCD screen.
• In stand-by mode the operation time of the lift after
the last maintenance (as day and hour) is screened on LCD screen.
• Adjustable maintenance time, warning when it is the
maintenance time on LCD screen,
• With built-in panel terminals, simple and fault free
installation, saving in time and control panel terminals.
• Over-load function
• Short-circuit protected display outputs which can be
adjusted to every floor.
• Gray/Binary code converter board
• Outputs for direction arrows, Out Of Service signal and
busy signal' via SA relay, signal common input for these outputs.
• Adjustable park floor and duration of parking time.
• Pulse bi-stable switches for car position sensing
• The car position information with 4 encoder inputs
• Optional, when the electric power is on again, moving the
car to the first floor.
• Warning signal on LCD screen when the door is open or when
no stop signal more than the adjusted time.
• Adjustable car lamp time, lock wait time, wait at floor
time, max high speed time and max low speed time.
• Door opening signal (AUTO) selection type of working
related to direction arrows,
• Function of manual movement at low speed by using program
buttons.
• Selection of the first target floor on outside displays
when each floor pass ng,
• At revision mode selection of the movement to limit
sw!tches and exact floor level.
• Selection of the floor with the full automatic door for the
lifts which has only one door is full automatic
• Electronic controlling of phases, phase order and PTC (Motor temperature) shown faults about these controls via LCD screen,
TECHNICAL SPECIFICATION:
